Dây Headphone Nordost Heimdall 2 (2m)


Nguồn gốc/Xuất xứ
Bảo hành
Đơn vị 
Mỹ
12 thángChiếc

KHI MUA HÀNG TẠI CƯỜNG THỊNH AUDIO:

  •         Trải nghiêm thực tế tại Phòng Demo miễn phí
  •         Giao hàng miễn phí ship (từ 5-30km)
  •         Cam kết Hàng Chính hãng 100%.
  •         Giá luôn tốt nhất thị trường
  •         Hổ trợ mua lại Sản phẩm khi Khách hàng muốn Nâng Cấp
  •         Nhận đặt hàng theo yêu cầu của Khách.
  •         Hổ Trợ Set Up miễn phí tại nhà.

Khách hàng hãy liên hệ với chúng tôi qua số Hotline : 0938.110.527 để được hổ trợ giá tốt nhất thị trường



Trạng thái: Còn hàng

Giá: 19,580,000 VND

  

HEIMDALL 2 HEADPHONE CABLE

The Heimdall 2 Headphone Cable consists of 32 AWG 7/40 conductors which have been individually insulated and twisted using Litz construction. Litz construction increases the pliability, as well as eliminates triboelectric noise within the cable and improves upon mechanical damping. In order to accommodate the added durability demanded from headphone cables, Nordost has included an Aramid fiber strength member to the construction of this cable. Integrating Aramid fibers into the cable design not only ensures its mechanical integrity, transferring the strain away from the cable’s conductors and to the fibers themselves, but the resonating properties of Aramid fibers also enhance sound quality.

To take things to the next level, the Heimdall 2 Headphone Cable employs Nordost’s proprietary Micro Mono-Filament technology with extruded FEP insulation around the conductors, as well as mechanically tuned lengths, which reduce internal microphony and high-frequency impedance resonance. As a result, the Heimdall 2 Headphone Cable acts as the ideal conduit to transfer an amazingly realistic reproduction of sound from your system to your hifi headphones.

The Heimdall 2 Headphone Cable is available with a variety of termination options that are compatible with all major players in the headphone market. Each cable is 2M and is terminated with a 4 pin balanced XLR male connector on the source end and also includes two adapters which are comprised of identical construction and technology as the headphone cable itself, and have also been cut to specific, mechanically tuned lengths. Both adaptors are terminated with a 4 pin balanced XLR female connector on one end and either a 3.5mm stereo mini or a 1/4in stereo phono on the opposite end.


Gửi bình luận của bạn

Đăng nhập để bình luận